DIY {Pull String} Angry Bird Pinata

I must say that I’m a bit surprised by the interest in my pins on my boys’ birthdays on pinterest. It never ceases to amaze me how much pinterest brings traffic to this blog.

Anyway, I promised back in March that I’d put up the tutorial for all you homemade moms out there. I will say, we work very hard at pleasing our children through seasons of their lives. My little big one was extremely excited about this. Though neither one of them helped. Nevertheless I stayed up til 2 am putting party stuff together for him that weekend…And you know what??? I loved it! It kicked butt in my book to put all my time and energy into my child’s birthday. I never realized how much of a homemaker I am until now. Β Wink wink. Well, you didn’t come here to read my voice did you? I thought so. Here is what you really want. This is a pull string pinata meant to be pulled from the bottom. All the kids had a piece of string to yank on. We didn’t have the option of hanging ours up at the party place so that is why we made it a pull string. You could easily just flip this upside down and hang it. Just make sure you secure the flaps a bit more before you do it.We cheated and made it a bit loose for the kiddos. My inspiration came from this lady.

IMG_6861-001

1. Get started by gathering what you need.

  • A pack of punch of balloons (.97 at Walmart)
  • Gather a whole stack of newspaper (I used my whole circular)
  • Make your paste using 2 cups of water and 2 cups of flour
  • 2 rolls crepe paper (any color you’d like)
  • Angry bird face printable(you could also use crepe paper to cover a party hat to make a beak and stick some black crepe paper to the butt for a fluffy tail)
  • Gloves (optional)
  • Few pieces of cardboard

howtotrainasuperhero

Once you have your balloon all blown up to the size you would like your pinata, cut your newspaper in strips. I folded mine in fours and cut the edges. Lazy I know.

IMG_6814

2. Dip your paper strips into your paste mixture and smooth until the excess paste runs off. Then lay your strip onto the balloon making overlapping patterns.

(Make sure you lay this out on a surface you don’t mind getting messy. I covered my table with plastic bags.)

IMG_6815

I was pressed for time after a while and just plain didn’t feel like doing it anymore at 12 am, so I dipped multiple strips in and went to work. Afterwards I smoothed the layers with my hand. I had regular latex gloves on. It felt really weird and icky!

howtotrainasuperhero

3. Set your balloon out to dry at least 24 hrs.

Funny story. I started on this project the night before my sons party. I knew I needed 24 hrs drying time but me being the “try it until you prove yourself wrong” mom, I did it anyway. What was my secret??? Fans. One ceiling fan and a big wind machine fan that sat on the floor. The sucker wasn’t fully dry that morning. (still a bit damp) So I let it dry a few more hours until I was done the cake. Needless to say, it can be done if you have one night and three fans at all angles.

IMG_6827

4. Cut a square in the top after the whole thing is dry. One that is big enough for you to stuff snacks in. and keep closed. Then punch holes down the sides of the squares. (Ignore the one in the middle. Ours was a bit fragile at the top due to lack of thickness. So make sure you make the paper thick on the top and bottom where you will be pulling and stuffing.)

5. Stick some ribbon or string through the holes and tie them in knots on the inside. So you should be able to dangle the pinata by holding the strings in your hand.

IMG_6832

6. Tape the knots down. I used gorilla tape to ensure that we’d have no trouble out of them. BOOM!

IMG_6831

IMG_6826

7. Fill the pinata with whatever you’d like. I love this part because I’m that mom to put out apples and string cheese at a party. I stuffed mine with a few cookies, not much candy and some other good snacks. I was talked out of putting apples in. LOL!

IMG_6833

8. Next take a few cardboard scraps and cut them in tiny squares.

Hot glue them on top of the flaps to make sure the flap stays put while you hang it or hold it.

IMG_6836

Here comes the most tedious part of this all if your working alone.

9. Cut your crepe paper in strips and glue them to your pinata horizontally. (about 5-6 inches long) Then cut slits in the middle of every strip.

We used hot glue until we ran out and realized glue sticks worked so much better!

IMG_6837

IMG_6835

You can see above how we’ve cut slits in the one’s at the bottom.

Keep going, we were being lazy and decided to finish that part at the end.

IMG_6838

Do this all the way until you reach the top. In our case the top was the bottom. Again laziness out of us! We fixed the peep holes aftewards.

My handsome did an awesome job helping me πŸ™‚

IMG_6847

Lastly find your printable face that you’d like to use and show up at the party with your homemade pinata.

We taped the flaps and everything so good. That it took an adult to yank the pinata really hard with the kids to let the pinata down.

I would do it again. But not without my hunney. πŸ™‚

Advertisements

3 thoughts on “DIY {Pull String} Angry Bird Pinata

  1. Yes Christine just cut the hole out of the bottom, fill it and glue or tape it closed. For it to hang, just punch two hole’s at the top where you popped the balloon and string it through. To reinforce the hold, you can put pieces of duct tape around the edges of where the popped balloon was and punch the hole through the tape, then string it through.

    * make sure where you will pop the balloon is small by putting the paper mache’ as close to the tie of the balloon as possible.

    I hope your little one’s enjoy this as much as we did! Thanks for stopping by. πŸ™‚

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s